X
تبلیغات
مکاترونیکس
آموزش تخصصی مکاترونیک و فروش محصولات نرم افزاری و سخت افزاری مکاترونیک

Integrated pressure sensor available from Festo (19/12/2008)

The new integrated pressure sensor is integrated into the Festo MPA valve terminal, allowing pressures to be monitored directly over the field bus system.

PPS self-adjusting pneumatic cushioning system 

PPS self-adjusting pneumatic cushioning system available from Festo (18/12/2008)

The new PPS self-adjusting pneumatic cushioning system from Festo adapts automatically to provide suitable cushioning characteristics within the permissible range.

The FED-CEC display unit and controller 

Integrated HMI controller available from Festo (17/12/2008)

The FED-CEC, available from Festo, is a flexible and space-optimised system. The display unit and controller are combined in a single unit, which means that system designers have only one component to purchase, programme ...

The spindle driven cantilever axis EGSA 

Festo offer EGSA spindle driven cantilever axis (14/11/2008)

The spindle driven cantilever axis EGSA, available from Festo, reduces cycle times to the absolute minimum. High-performance mechanical components and a wide choice of motors ensure the ideal answer to the needs of any application.

VPPM Proportional pressure regulator 

Festo VPPM Proportional pressure regulator with added dimensions (13/11/2008)

The VPPM Proportional pressure regulator, available from Festo, has the right parameters for every application. In-line or flange versions, current-or voltage actuated, connection to field bus/Ethernet through a CPX terminal ...

The DFST stopper cylinder  

DFST stopper cylinder from Festo (20/10/2008)

The Festo DFST stopper cylinder can stop almost any workpiece carrier. This stopper cylinder has a load range almost three times higher than the previous model.

The VOVG miniature valves 

VOVG miniature valves for compact handling applications available from Festo (20/10/2008)

Festo have released the new compact solenoid valve series VOVG. Its compact dimensions and high flow rates make it suitable for all kinds of installation applications.

SOOF Fork Light Sensor 

SOOF Fork Light Sensor available from Festo (17/10/2008)

The SOOF Fork Light Sensor, available from Festo, provides reliability, efficiency and good value for money.

High speed switching solenoid valves 

High speed switching solenoid valves available from Festo (10/10/2008)

Festo offer high speed switching solenoid valves, which are available in MH.2, MH.3 and MH.4 sizes. The MH.2 size includes a 5/2 function valve.

DGC pneumatic linear drive 

DGC pneumatic linear drives available from Festo (6/10/2008)

The DGC pneumatic linear drive, available from Festo, has set a new standard for precision, reliable guidance and high load capacity.

 

VOVG miniature valves from Festo (29/08/2008)

Festo have released VOVG series of compact solenoid valves. The compact dimensions and high flow rates of the miniature valves makes it suitable for all kinds of installation situations.

 

DFST stopper cylinders available from Festo (28/08/2008)

Festo distribute a range of DFST stopper cylinders suitable for stopping all types of workpiece carriers.

 

Pneumatic rotary indexing tables from Festo (27/08/2008)

Festo provide distribution services for a range of pneumatic rotary indexing tables with high load capacities and precision.

MPA manually adjustable pressure regulator 

MPA manually adjustable pressure regulators from Festo (29/07/2008)

The MPA manually adjustable pressure regulators are now available from Festo. The Festo MPA manually adjustable pressure regulators provide a fast and convenient space saving solution for pressure control on pneumatic actuators.

SOPA air gap sensor  

SOPA air gap sensor available from Festo (28/07/2008)

The new SOPA air gap sensor, from Festo, is designed to be used in tooling applications to make sure that a part is seated properly in a jig before it is machined, welded or assembled. The SOPA air gap sensor is able to ...

 

MS6-SFE flow sensor available from Festo (16/06/2008)

Capable of operating as a stand-alone flow sensor, or as part of an MS6 service unit combination, the MS6-SFE features a clearly laid out, backlit LCD display showing flow or consumption data combined with a choice of output ...

MS12 -- ideal for central and decentral air supply systems. 

Compressed-air preparation range expanded (28/08/2006)

FESTO has expanded its range of MS series air preparation service units with the addition of the giant MS12 unit capable of delivering 22,000 litres a minute of compressed air. The MS12 offers users everything they are looking ...

CPX/MPA modular pneumatic valve terminals. 

Networking with pneumatic and electrical components (8/08/2006)

MAKING connections and detecting sources of error have enhanced the function range of the CPX terminal, the bridge between the worlds of pneumatics and electronics. Combined with the modular pneumatic valve terminal MPA, ...

CPX/MPA modular pneumatic valve terminals networking with 
pneumatic and electrical components 

Networking with pneumatic and electrical components (14/07/2006)

MAKING connections and detecting sources of error have enhanced the function range of the CPX terminal, the bridge between the worlds of pneumatics and electronics. Combined with the modular pneumatic valve terminal MPA, ...

Festo's digital customer information system: holistic approach to 
design and purchasing. 

Festo software tools and e-commerce (5/05/2006)

IN industrial automation, material costs only make up 10% of all project costs. Approximately 90% of costs along the value added chain therefore offer the greatest potential for savings and one which can be successfully ...

Guided modular drive. 

Modular guided drives (11/04/2006)

THE DFM modular system and the small rodless DGC drive are top contenders at Festo. As part of a full range of guided drives, they both replace elaborate user-fabricated solutions and save space as well. They feature a maximum ...

Cylinders and valve terminals are HACCP approved to international 
standards. 

Cylinder for splash zone areas (19/07/2005)

THE Festo Clean Design Cylinder (CDN) is designed and built to operate in splash zone areas. It has smooth, corrosion-resistant surfaces with no exposed threads.

DGE-RF linear actuator. 

Extremely fast linear actuator (17/06/2005)

FESTO’s extremely fast linear actuator that can move large payloads at velocities of up to 10m/sec, is a versatile platform for boosting automation productivity. Whilst maintaining a very high level of quality, this product ...

+ نوشته شده در  شنبه 1389/04/12ساعت   توسط Mezerji | 

Festo News

 

Category 4 safety valves now available from Festo (22/01/2010)

Festo have designed an air preparation range which offers users a certified and tested unit that can be integrated into new or existing circuits.

 

MS precision pressure regulators available from Festo (19/08/2009)

Available from Festo, MS6-LRP-PO series of precision pressure regulators are ideal for use in the automotive industry.

 

Powerful and precise swivel drives available from Festo (18/08/2009)

Available from Festo, DRQD-B modular twin-piston swivel drives with modified piston material provide improved repetition accuracy for swivel motions.

 

New pressure booster DPA available from Festo (17/08/2009)

New variants of the pressure booster DPA, from Festo, can assist with the reduction of the costs of compressed air, directly within the application.

 

CPE solenoid valves from Festo (14/08/2009)

Available from Festo, CPE solenoid valves can be used as an individual valve and also on a sturdy aluminium manifold.

 

Festo online shop helps Hydraulic & Pneumatic’s business (30/07/2009)

The Internet has revolutionised the way we live and do business and for Morwell based Hydraulic & Pneumatic, the Internet has proved to be a real boon for business – thanks to Festo’s Online Shop.

 

VSNB control valves for process actuators from Festo (25/06/2009)

The new VSNB valves from Festo are an economical and versatile solution for the control of process actuators. The valves can be used to actuate both single-acting and double-acting actuators which fea

 

SMAT-8M position transmitters available from Festo (24/06/2009)

The new SMAT-8M position transmitter from Festo is installed, which is similar to an ordinary reed switch. With its compact design, the SMAT-8M position transmitter can be securely installed flush in the slot o

 

HGPLE electric grippers available from Festo (23/06/2009)

Festo offer HGPLE electric grippers. The long stroke of the HGPLE electric grippers enables it to be used with a number of different sized work pieces. With the tactile gripping option, the HGPLE elec

 

Quarter-turn actuators for process automation from Festo (22/06/2009)

DFPB pneumatic quarter turn actuators from Festo are suitable for wastewater treatment plants, pharmaceutical industry and food production plants. These actuators can be used to perform opening and cl

 

2D and 3D multi-axis handling systems available from Festo (6/03/2009)

Plug and work multi-axis handling systems are now available from Festo. Purchased in the form of standard or customised handling units, they provide agility, precision and cost-effectiveness. The orde

 

HSP and HSW handling modules for pick and place applications available from Festo (6/03/2009)

Pick and place handling modules are now available from Festo as ready-to-install solutions. The HSP handling module is a semi-rotary drive with a link guide to provide pick and place movement, while t

 

Positioning Drives software tool for electrical drive systems from Festo (5/03/2009)

The Positioning Drives software tool for all electrical drives from Festo enables fast, easy and reliable design and planning of motor and axis combinations in three simple steps.

 

SPAB pressure sensors available from Festo (4/03/2009)

Festo offer a standard pressure sensor, which can be used in almost any application. Compact and versatile, the SPAB pressure sensor brings a high level of reliability to a wide range of manufacturing

 

ERMB electrical rotary drive modules available from Festo (11/02/2009)

The ERMB rotary drive module from Festo can be used as a front-end rotary module with any rotation angle up to 360° or as a stationary, numerically controlled rotary table. The ERMB rotary drive modul

 

EGC electric linear axis available from Festo (12/01/2009)

The new EGC electric linear axis from Festo offers efficiency, maximum dynamic response and improved rigidity.

 

+ نوشته شده در  شنبه 1389/04/12ساعت   توسط Mezerji | 
 
صفحه نخست
پروفایل مدیر وبلاگ
پست الکترونیک
آرشیو
عناوین مطالب وبلاگ
درباره وبلاگ
این وبلاگ با هدف ارایه مطالب آموزشی علوم اتوماسیون صنعتی و مشاوره و تامین قطعات موردنیاز صنایع محترم ایجاد شده است

نوشته های پیشین
تیر 1389
فروردین 1389
پیوندها
شرکت فستوپنیوماتیک ایران
بانک اطلاعات صنایع ایران
 

 RSS

POWERED BY
BLOGFA.COM

وب سایت ختم قرآن مجید ip information